PUBLICATIONS LIST

Book

Physics of Turbulent Jet Ignition: Mechanisms and Dynamics of Ultra-lean Combustion

First edition, Springer International, 2018

Book Chapter
S Biswas, I Ekoto, “Ozone Added Spark Assisted Compression Ignition,” in

‘Advanced Combustion Techniques and Engine Technologies for Automotive Sector,’

Editors: AP Singh, R Agarwal, AK Agarwal, Springer Nature, November 2019. 

Patent

 

S Biswas, L Qiao, “Method of Operating a Combustion Engine”, US patent, 2018/0119957 A1. PDF

Journal Publications

 

S Biswas, I Ekoto, “Spark assisted compression ignition engine with stratified charge combustion and ozone addition,” SAE Technical Paper 2019-01-2253, 2019, 2019. PDF

S Biswas, I Ekoto, “Detailed investigation into the effect of ozone addition on spark assisted compression ignition engine performance and emissions characteristics,” SAE Technical Paper 2019-01-0966, 2019. PDF

S Biswas, P Zhang, H Wang, L Qiao, “Propagation and extinction behavior of methane/air premixed flames through straight and converging-diverging microchannels,” Applied Thermal Engineering, Vol. 148, February 2019. PDF

R Scarcelli, T Wallner, S Som, S Biswas, I Ekoto, D Breden, A Karpatne, L Raja, “Modeling non-equilibrium discharge and validating transient plasma characteristics at above-atmospheric pressure,” Plasma Sources Science and Technology, 27 124006, 2018. PDF

 

S Biswas, L Qiao, “Ignition of Ultra-lean Premixed Hydrogen/Air by An Impinging Hot Jet,” Applied Energy, Volume 228, p 954-964, 2018. PDF

 

S Biswas, L Qiao, “Thermo-acoustic Combustion Instability of Premixed Ultra-lean H2/Air Mixtures by a Prechamber Generated Hot Turbulent Jet,” Journal of Propulsion and Power, May 2018. PDF

 

S Biswas, L Qiao, “Ignition of Ultra-Lean Premixed H2/air using Multiple Hot Turbulent Jets Generated by Pre-    chamber Combustion,” Applied Thermal Engineering, Volume 132(5), p 102 – 114, 2018. PDF

 

S Biswas, L Qiao, “A Numerical Investigation of Ignition of Ultra-Lean Premixed H2/Air Mixtures by Pre-chamber Supersonic Hot Jet,” SAE International Journal of Engines, SAE 2017-01-9284, 2017. PDF

 

S Tanvir, S Biswas, L Qiao, “Evaporation characteristics of ethanol droplets containing graphite nanoparticles under infrared radiation,” International Journal of Heat and Mass Transfer, Volume 114, p 541 – 549, 2017. PDF

 

S Biswas, L Qiao, “A Comprehensive Statistical Investigation of Schlieren Image Velocimetry (SIV) using High-Velocity Helium Jet,” Experiments in Fluids, Volume 58(3), p 1 – 20, 2017. PDF

 

JD Ortega-Alvarez, RA Streveler, AW Fentiman, HW Aggarwal, S Biswas, BS Coventry, A Hassan, ML McNamara, SN Paul, “From Graduate Students to Faculty: Portraits of Balance in the Professional Development Plans of Engineering Graduate Students,” American Society for Engineering Education, ID 28390, June 2017. PDF

 

S Biswas, S Tanvir, H Wang, L Qiao, “On Ignition Mechanisms of Premixed CH4/Air and H2/Air Using a Hot Turbulent Jet Generated by Pre-Chamber Combustion,” Applied Thermal Engineering, Volume 106, p 925 – 937, 2016. PDF

 

S Biswas, L Qiao, “Prechamber Hot Jet Ignition of Ultra-Lean H2/Air Mixtures: Effect of Supersonic Jets and Combustion-Instabilities,” SAE International Journal of Engines, SAE 2016-01-0795, 2016. PDF

 

S Biswas, K Kopp, M Renfro, BM Cetegen, “Phase-Resolved Characterization of Conical Premixed Flames Near and Far from Blowoff,” Combustion and Flame, Volume 160, Issue 12, p 2843 – 2855, 2013. PDF

 

S Biswas, I Ekoto, R Scarcelli, SY Lee, “Two-photon absorption laser-induced fluorescence measurements of atomic oxygen from transient plasma discharges at above atmospheric pressures,” under review, Plasma Sources Science and Technology, 2019.

 

V Gururajan, R Scarcelli, A Karpatne, D Breden, S Biswas, L Raja, I Ekoto, “A computational study of the thermodynamic conditions leading to autoignition in nanosecond pulsed discharges,” under review, Internal Combustion Engine Fall Conference, ICEF2019-7260, Chicago, IL, 2019.

 

S Biswas, I Ekoto, R Scarcelli, “Transient plasma ignition of ultra-lean propane/air mixtures,” under review, Combustion and Flame, 2019.

 

S Biswas, I Ekoto, V Gururajan, R Scarcelli, “Ozone generation by low-temperature plasma discharges,” in preparation for Ozone: Science & Engineering, expected submission November 2019.

 

S Biswas, P Rai, B Debuscherre, “Uncertainty quantification in Schlieren Image Velocimetry (SIV),” in preparation for Experiments in Fluids, expected submission March 2020.

 

T Lucchini, G D’Errico, J Gómez-Soriano, R Novella, S Biswas, “Modeling the turbulent jet ignition process at constant-volume conditions,” in preparation for SAE World Congress, Detroit, April 2020.

 

S Biswas, I Ekoto, “Comparison of spark, corona, and plasma ignition systems for gasoline combustion,” in preparation for SAE World Congress, Detroit, April 2020.

 

S Biswas, A Konduri, M Reith, H Kolla, I Ekoto, JH Chen, “Direct numerical simulation (DNS) of turbulent reacting jet ignition,” in preparation for International Symposium on Combustion, July 2020.

Conference Proceedings and Presentations

S Biswas, I Ekoto, “Spark assisted compression ignition engine with stratified charge combustion and ozone addition,” JSAE/SAE Powertrains, Fuels and Lubricants International Meeting, Kyoto, Japan, August 2019.


I Ekoto, S. Biswas, “Static cell measurements of lean/dilute limit extension with barrier discharge ignition,” Advanced Engine Combustion (AEC) program review meeting, US Council for Auto Research, Southfield, MI, August 2019.


S Biswas, I Ekoto, V Gururajan, R Scarcelli, “Reactivity characterization due to ozone generation by low-temperature plasma discharges at engine relevant densities,” IEEE Pulsed Power and Plasma Science Conference, Orlando, FL, June, 2019.


S Biswas, I Ekoto, “Detailed investigation into the effect of ozone addition on spark assisted compression ignition engine performance and emissions characteristics,” SAE World Congress, Detroit, MI, April 2019.


S Biswas, I Ekoto, R Scarcelli, “Transient plasma ignition of lean and dilute propane/air mixtures,” 11th US National Combustion Meeting, Pasadena, CA, March 2019.


S Biswas, I Ekoto, R Scarcelli, “Transient plasma ignition for automotive applications,” Advanced Engine Combustion (AEC) program review meeting, Oak Ridge National Laboratory, January 2019.


R Scarcelli, J Kim, S Biswas, I Ekoto, “Update on simulation tools for advanced ignition systems,” Advanced Engine Combustion (AEC) program review meeting, Oak Ridge National Laboratory, January 2019.


J Kim, A Shah, R Scarcelli, S Biswas, I Ekoto, “Assessment of computational tools for modeling pre-chamber ignition and combustion process in engines,” Advanced Engine Combustion (AEC) program review meeting, Oak Ridge National Laboratory, January 2019.


S Biswas, I Ekoto, R Scarcelli, “Transient plasma ignition (TPI) for automotive applications,” 4th International Conference on Ignition Systems for Gasoline Engines, Berlin, Germany, December 2018.


S Biswas, R Scarcelli, I Ekoto, “Combustion and emission characteristics of ozone-assisted SI,” Advanced Engine Combustion (AEC) program review meeting, US Council for Auto Research, Southfield, MI, August 2018.


R Scarcelli, S Biswas, I Ekoto, “Recent progress in low-temperature plasma ignition modeling,” Advanced Engine Combustion (AEC) program review meeting, US Council for Auto Research, Southfield, MI, August 2018.


S Biswas, I Ekoto, R Scarcelli, “Detailed speciation and reactivity characterization of products generated by transient plasma discharges in fuel/oxidizer mixtures at engine relevant densities,” IEEE International Conference on Plasma Science (ICOPS), Denver, CO, June 2018.


R Scarcelli, A Zhang, S Biswas, I Ekoto, T Wallner, D Breden, A Karpatne, L Raja, “Multi-dimensional modeling of non-equilibrium plasma for automotive applications,” SAE World Congress, Detroit, MI, April 2018.


S Biswas, SY Lee, R Scarcelli, I Ekoto, “Heating and O-radical formation from transient plasma discharges at engine relevant densities,” Advanced Engine Combustion (AEC) program review meeting, Argonne National Laboratory, January 2018.


S Biswas, L Qiao, “Ignition of ultra-lean premixed H2/air using an impinging hot turbulent jet,” AIAA SciTech, Kissimmee, FL, January 2018.


S Biswas, L Qiao, “Physics of flame propagation in microchannels,” AIAA SciTech, Kissimmee, FL, January 2018.


S Biswas, L Qiao, “An experimental and numerical investigation of flame propagation in converging-diverging microchannels,” Proceedings of the China National Symposium on Combustion, Nanjing, China, October 2017.


S Biswas, L Qiao, “Flame propagation through a converging-diverging microchannel,” 10th U.S. National Combustion Meeting, University of Maryland, April 2017.


S Biswas, L Qiao, “Combustion instabilities of ultra-lean premixed H2/air mixtures by pre-chamber hot jet ignition,” 10th U.S. National Combustion Meeting, University of Maryland, April 2017.


S Biswas, L Qiao, “Ignition of ultra-lean premixed H2/air by a supersonic hot jet,” Central States Spring Combustion Meeting, Knoxville, TN, May 2016.


S Biswas, L Qiao, “Ignition of premixed CH4/air and H2/air mixtures by a hot jet generated by pre-chamber combustion,” 9th U.S. National Combustion Meeting, Cincinnati, OH, May 2015.


S Biswas, L Qiao, “Ignition of premixed methane/air mixtures using a hot turbulent jet generated by pre-chamber combustion,” Central States Spring Combustion Meeting, University of Oklahoma, March 2014.


S Biswas, L Qiao, “Pre-chamber hot jet ignition of premixed lean natural gas/air,” 8th U.S. National Combustion Meeting, University of Utah, May 2013.


S Biswas, BM Cetegen, M Renfro, “Phase-resolved characterization of conical premixed flames near and far from blowoff,” Eastern States Fall Combustion Meeting, University of Connecticut, October 2011.


S Biswas, K Kopp, T Jensen, BM Cetegen, M Renfro, “High-speed imaging of near-blowoff behavior for bluff-body stabilized flames in vitiated flow with stratified fueling,” 7th US National Combustion Meeting, Georgia Tech, March 2011.


S Basu, S Chaudhuri, S Biswas, BM Cetegen, M Renfro, “On scalar mixing in the field of closely interacting vortex pairs and couples,” 7th US National Combustion Meeting, Georgia Tech, March 2011.


S Biswas, A Bandyopadhyay, “Thermal modeling of the heat-affected zone in laser grooving on a stainless steel slab,” 8th Biennial Workshop on Application of Laser in Mechanical Industries and Materials Processing, Jadavpur University, Kolkata, India, October 2010.


S Biswas, A Bandyopadhyay, “The effects of process parameters on dimensional inaccuracy due to spatter deposition in laser percussion drilling,” 8th Biennial Workshop on Application of Laser in Mechanical Industries and Materials Processing, Jadavpur University, Kolkata, India, October 2010.


D Sinha, S Biswas, D Roy Mahapatra, “Design of semiconductor-based cooling device for SMA actuators using finite element analysis,” 3rd International Conference on MEMS, Smart Structures and Materials, Central Glass and Ceramic Research Institute, Kolkata, India, February 2009.


S Biswas, V Kumar, K Ghosh, A Mukhopadhyay, “Exergy analysis of molten corium water interaction,” 35th National Conference on Fluid Mechanics and Fluid Power, PES Institute of Technology, Bengaluru, India, April 2008.

© 2019 by Sayan Biswas

  • LinkedIn Social Icon
  • Twitter
  • Facebook